Water/condensation in tail light
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
I noticed this today, I'm sure it wasn't there a couple of days ago. I'm concerned it will turn the light that horrible browny colour. How long does that take to happen? Is there anything I can do without buying a new rear light? Can it be taken out and cleaned? And is there some kind of seal I should look for a leak in (common place for it) ?
Cheers guys.
Sent from Han Solo using TK-421's phone.
Cheers guys.
Sent from Han Solo using TK-421's phone.
You do not have the required permissions to view the files attached to this post.
- AstrO
- Help Desk Expert
- Posts: 4839
- Joined: Tue Jun 28, 2005 9:28 pm
- Location: Adelaide
- Contact:
Re: Water/condensation in tail light
Never had that in my rear lights, so I'm not sure what the cause could be. Maybe VT will know as he thrashed one out for a year.
- w00dsy
- The Senna of Hoppers Crossing
- Posts: 24457
- Joined: Wed Mar 02, 2005 2:41 pm
- Location: incognito
Re: Water/condensation in tail light
If there's plastic around Dex will find a way of getting moisture in it.
typed on phone
typed on phone
-
- Smooth Lubricator.
- Posts: 12070
- Joined: Sun Jun 26, 2005 7:48 pm
- Location: The wet central coast
Re: Water/condensation in tail light
I'm not an expert, but if it does not dry out naturally in a few dry days, you maybe in for some trouble. Not just discolouration, but potential bulb-murdering (which maybe unchangeable by itself, thanks to modern car designs)
First big question is, if it's in fact condensation, or water can leak in somehow? I've seen cars where the insulation around those part wasn't up to scratch and water could get in but not out (i.e. the insulation was borked at the top somewhere)
sent from...wait, it has not been sent at all!
First big question is, if it's in fact condensation, or water can leak in somehow? I've seen cars where the insulation around those part wasn't up to scratch and water could get in but not out (i.e. the insulation was borked at the top somewhere)
sent from...wait, it has not been sent at all!
Surprise, no sig. Now there is. Or is there?
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
I guess I'll wait and see what happens maybe it will dry out. :S
One of these days I'll get on top of all that needs being done with this car. Freakin love the car, but by christ it's cost me a lot. Was just looking at getting some panels resprayed to fix some stone chips. Might have to wait if I need a new rear light. Can't be cheap!
Sent from Han Solo using TK-421's phone.
One of these days I'll get on top of all that needs being done with this car. Freakin love the car, but by christ it's cost me a lot. Was just looking at getting some panels resprayed to fix some stone chips. Might have to wait if I need a new rear light. Can't be cheap!
Sent from Han Solo using TK-421's phone.
- VTRacing
- Team Pedant (c)
- Posts: 4651
- Joined: Thu Oct 25, 2007 9:14 am
Re: Water/condensation in tail light
They never stayed intact for long enough for the problem to arise.AstrO wrote:Never had that in my rear lights, so I'm not sure what the cause could be. Maybe VT will know as he thrashed one out for a year.
- Quincy
- Posts: 1700
- Joined: Fri Apr 21, 2006 1:30 pm
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
lol!
I spoke to a chap today at a Subaru spares place near me... He told me to take the light out, and drill a couple of small holes through the back.
Sent from Han Solo using TK-421's phone.
I spoke to a chap today at a Subaru spares place near me... He told me to take the light out, and drill a couple of small holes through the back.
Sent from Han Solo using TK-421's phone.
-
- Founder
- Posts: 1354
- Joined: Mon Jan 10, 2005 8:55 am
- Location: Southern Highlands
Re: Water/condensation in tail light
So, rather than stop water getting in, you just let it out to go somewhere else ? I can see that this would be a way for it to dry out, but surely you should find where the moisture is coming from first, seals, slight crack in lens, etc.DexterPunk wrote:lol!
I spoke to a chap today at a Subaru spares place near me... He told me to take the light out, and drill a couple of small holes through the back.
Sent from Han Solo using TK-421's phone.
I don't know where I'm going but I'm on my way!
http://www.flickr.com/photos/zedmacca/" onclick="window.open(this.href);return false;
http://www.flickr.com/photos/zedmacca/" onclick="window.open(this.href);return false;
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
Yeah, he gave me a couple of ideas where to look for damaged seals etc. but said if its only condensation the holes will let it let it dry. As far as I can tell the idea is to just leave the holes there in the back of the light and not bother to silicon them back up after its dried.
Sent from Han Solo using TK-421's phone.
Sent from Han Solo using TK-421's phone.
-
- Midget Wanker
- Posts: 5349
- Joined: Sat Jan 08, 2005 1:44 pm
- Location: In a glass case of emotion
- Contact:
Re: Water/condensation in tail light
He is a wanker. It's common on even the most recent cars for the tail/stop/running lights to have moisture in them. Most commonly it's a poor seal, which can be repaired. Depends how far you are willing to go. I wouldn't drill in to my lights unless I was sure you could make it one way.
At work we even see the sealed LED lights with moisture in them.
It can effectively corrode the conductors and terminals, which can be a real ass because you think you have lost a bulb but turns out the bulb is ok. But the worst part in my opinion is that the silver on the reflector can turn black, which is not repairable.
It takes time for that to happen however. I would remove the light assembly and look at the seal, iirc the subi lights use a thin rubber seal. It may have been kinked or damaged in production. Sikaflex (black silicon) will seal it. Use saliva on your finger to create a smooth seal after you apply the silicon. Metho on a rag will clean up the rest without damaging the plastic of the light. You can use nail polish remover, acetone free only though.
One of the ute's at work fills it's rear lights over 3/4 full when ever it rains, but the lights still work, lol.
At work we even see the sealed LED lights with moisture in them.
It can effectively corrode the conductors and terminals, which can be a real ass because you think you have lost a bulb but turns out the bulb is ok. But the worst part in my opinion is that the silver on the reflector can turn black, which is not repairable.
It takes time for that to happen however. I would remove the light assembly and look at the seal, iirc the subi lights use a thin rubber seal. It may have been kinked or damaged in production. Sikaflex (black silicon) will seal it. Use saliva on your finger to create a smooth seal after you apply the silicon. Metho on a rag will clean up the rest without damaging the plastic of the light. You can use nail polish remover, acetone free only though.
One of the ute's at work fills it's rear lights over 3/4 full when ever it rains, but the lights still work, lol.
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
Thanks heaps cj. How do you dry it out before fixing up the seal though? (if that's the problem).
Sent from Han Solo using TK-421's phone.
Sent from Han Solo using TK-421's phone.
-
- Midget Wanker
- Posts: 5349
- Joined: Sat Jan 08, 2005 1:44 pm
- Location: In a glass case of emotion
- Contact:
Re: Water/condensation in tail light
remove the light assembly from the car, remove the bulbs and leave it in the sun.
I wouldn't spray RP7 or WD40 in there, even though its for water dispersal, it will film the light assembly. You can spray the bulb assembly though, or with contact cleaner.
I wouldn't spray RP7 or WD40 in there, even though its for water dispersal, it will film the light assembly. You can spray the bulb assembly though, or with contact cleaner.
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Water/condensation in tail light
Thanks again. I'll give it a crack when I get a day free.
Sent from Han Solo using TK-421's phone.
Sent from Han Solo using TK-421's phone.
-
- Midget Wanker
- Posts: 5349
- Joined: Sat Jan 08, 2005 1:44 pm
- Location: In a glass case of emotion
- Contact:
Re: Water/condensation in tail light
np mate, if you need to you can contact me about it. I am no expert but we do see a bit of this at work.
- Hz-Lab
- Magoo
- Posts: 9898
- Joined: Wed Oct 12, 2005 11:45 pm
- Location: Radelaide
- Contact:
Re: Water/condensation in tail light
Grab the biggest hair dryer from your salon and aim it at the light.
...hehehehehhe..
...hehehehehhe..