Whitegoods help in here....
- Exar Kun
- Sensible Mick
- Posts: 11331
- Joined: Wed Dec 22, 2004 4:46 pm
- Location: Canberra
Re: Whitegoods help in here....
We've got a Bosch Avantixx washer dryer (can't find manual or specific model) and it keeps throwing up A:01 and A:02 errors. It goes through pretty much the entire cycle before doing this. It just means we have to unlock the door manually. Any idea what the errors are and what's causing them? Thanks
"If we can hit that bull's-eye, the rest of the dominoes will fall like a house of cards. Checkmate!"
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Re: Whitegoods help in here....
It could just mean the door catch is faulty and not unlocking automatically. Other than that, I never really had much to do with Bosch washers etc. What does google turn up?Exar Kun wrote:We've got a Bosch Avantixx washer dryer (can't find manual or specific model) and it keeps throwing up A:01 and A:02 errors. It goes through pretty much the entire cycle before doing this. It just means we have to unlock the door manually. Any idea what the errors are and what's causing them? Thanks
Sent from my Nexus 5
- Exar Kun
- Sensible Mick
- Posts: 11331
- Joined: Wed Dec 22, 2004 4:46 pm
- Location: Canberra
Re: Whitegoods help in here....
Difficult to nail anything down with Google unfortunately. Our best chance is probably to find manual.
"If we can hit that bull's-eye, the rest of the dominoes will fall like a house of cards. Checkmate!"
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Re: Whitegoods help in here....
Manuals rarely have the error codes in there. I found most companies were receptive to an email asking what the error code meant.Exar Kun wrote:Difficult to nail anything down with Google unfortunately. Our best chance is probably to find manual.
Sent from my Nexus 5
- Exar Kun
- Sensible Mick
- Posts: 11331
- Joined: Wed Dec 22, 2004 4:46 pm
- Location: Canberra
Re: Whitegoods help in here....
Cool, will do that, thanks.
"If we can hit that bull's-eye, the rest of the dominoes will fall like a house of cards. Checkmate!"
- wobblysauce
- Seen it, Done it, Invented it!
- Posts: 10489
- Joined: Thu Aug 25, 2005 9:53 am
- Location: On an Island in the south
Re: Whitegoods help in here....
Ello Santaman.. I know most are the same but with just different holding amounts.. I got an issue and google foo is failing me...
Kelvinator 410 cyclic impression series, the freezer on the bottom one.
Model: CB413V-R*7
1, Manual.. for the life of me I can not find it.
2, A globe for the person in the fridge.. no writing on it, L 55mm W 27mm, flat sided, dome top with bayonet connection.
Kelvinator 410 cyclic impression series, the freezer on the bottom one.
Model: CB413V-R*7
1, Manual.. for the life of me I can not find it.
2, A globe for the person in the fridge.. no writing on it, L 55mm W 27mm, flat sided, dome top with bayonet connection.
Some play it safe on the merry-go-round, others go for the thrills of the roller-coaster.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Re: Whitegoods help in here....
Run into any electrical wholesale place mate. They'll have it. There isnt' specific globes. Just find one that fitswobblysauce wrote:Ello Santaman.. I know most are the same but with just different holding amounts.. I got an issue and google foo is failing me...
Kelvinator 410 cyclic impression series, the freezer on the bottom one.
Model: CB413V-R*7
1, Manual.. for the life of me I can not find it.
2, A globe for the person in the fridge.. no writing on it, L 55mm W 27mm, flat sided, dome top with bayonet connection.
- wobblysauce
- Seen it, Done it, Invented it!
- Posts: 10489
- Joined: Thu Aug 25, 2005 9:53 am
- Location: On an Island in the south
Re: Whitegoods help in here....
Done and done Santa.
Some play it safe on the merry-go-round, others go for the thrills of the roller-coaster.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
- dvestate
- Prize Winning ARSE
- Posts: 2497
- Joined: Sun Feb 27, 2005 4:06 pm
- Location: In front of a computer...
Re: Whitegoods help in here....
Got one for you that is a bit weird..... Have a 8 year old Maytag upright washing machine, on the Delicate load it gets to the spin cycle and the pump to get the water out does not start every time. Just spins but no pumping out of the water, you stop it, spin the dial back to spin on that cycle, lift it so it turns back on an bam starts pumping...
Model - PAV2300AWW
Model - PAV2300AWW
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
- dvestate
- Prize Winning ARSE
- Posts: 2497
- Joined: Sun Feb 27, 2005 4:06 pm
- Location: In front of a computer...
Re: Whitegoods help in here....
had it run all the way to the end of the cycle, as you said pretty weird as I would expect it to do it on all cycles
- dvestate
- Prize Winning ARSE
- Posts: 2497
- Joined: Sun Feb 27, 2005 4:06 pm
- Location: In front of a computer...
Re: Whitegoods help in here....
Basically it will run itself through the cycle (old school knob timer style) and get to the end. Open the lid (finished no noise) and it is sitting there with water in it. It does still 'spin' through the final cycle just does not drain the water
- wobblysauce
- Seen it, Done it, Invented it!
- Posts: 10489
- Joined: Thu Aug 25, 2005 9:53 am
- Location: On an Island in the south
Re: Whitegoods help in here....
First thoughts where you santa..
Some play it safe on the merry-go-round, others go for the thrills of the roller-coaster.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
ᕙ༼ຈل͜ຈ༽ᕗ vs ლ(ಠ益ಠ)ლ
I have a joke for you. I have a prediction that you are going to walk into a bar, my prediction was wrong and your wallet is gone.
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Re: Whitegoods help in here....
Santa, what's your thoughts on Bosch washing machines? My housemate is moving and I'm looking at buying his. A couple of years old, and the price seems good looking online.
- Exar Kun
- Sensible Mick
- Posts: 11331
- Joined: Wed Dec 22, 2004 4:46 pm
- Location: Canberra
Re: Whitegoods help in here....
We're waiting on our Bosch washing machine to be repaired at the moment. It's about 7 months old and a control board has died.
"If we can hit that bull's-eye, the rest of the dominoes will fall like a house of cards. Checkmate!"
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Bosch weren't good for electrics and parts were/are expensive. It also depends where you live for repair people too. Not much retro fits to them. I'm assuming it's front loading?
Edit - bear in mind that it's been a long time since I've worked with this stuff now and I'm going on 7 years out of the business so things could have changed.
Sent from my Nexus 5
Edit - bear in mind that it's been a long time since I've worked with this stuff now and I'm going on 7 years out of the business so things could have changed.
Sent from my Nexus 5
- markus
- Posts: 949
- Joined: Sat Dec 18, 2004 7:09 pm
- Location: Gitmo nation reindeer
Re: Whitegoods help in here....
So, the Blomberg was finally beyond repair. Got a nice Miele about 1.5 years ago.Santaria wrote:It's probably either blown the element or the control switch (more than likely). Just throw a call out fee at it and see what they dig up. For all the years I've repaired ovens, I can't recall ever working on a Blomberg. Miele's are good, but expensive for repairs. I've said it a few times in this thread: Electrolux, Westinghouse, Simpson and Kelvinator are what I always recommend.markus wrote:Bah, my trusty 15ish years old Blomberg oven decided to call it a day.
Both oven lights went out simultaneously (lamps are still ok so not blown - and naturally all the house fuses are ok) and it no longer heats. If I select convection the fan starts to blow (cold) air and the panel works so it gets some electricity. Does that sound like an expensive repair, or should I just go out and get a nice Miele ?
Guess what. Today it blew up mid-baking. No lights, no fan, nothing on the front panel. Completely dead. I wonder if there's an oven in the market that you can actually use for baking 3-4 times/week
Much cycling such kilometers.
- markus
- Posts: 949
- Joined: Sat Dec 18, 2004 7:09 pm
- Location: Gitmo nation reindeer
Re: Whitegoods help in here....
Quality installation by a qualified electrician.markus wrote: So, the Blomberg was finally beyond repair. Got a nice Miele about 1.5 years ago.
Guess what. Today it blew up mid-baking. No lights, no fan, nothing on the front panel. Completely dead. I wonder if there's an oven in the market that you can actually use for baking 3-4 times/week
More pics
Too bad I'm not living in the USA or I'd be rich, however I won't settle for a 20€ store certificate either.
Last edited by markus on Mon Mar 30, 2015 4:35 am, edited 1 time in total.
Much cycling such kilometers.
- norbs
- fucking right wing vegan lesbian
- Posts: 24216
- Joined: Fri Dec 17, 2004 6:01 pm
- Contact:
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Re: Whitegoods help in here....
G'day Santa, or anyone else who can offer their knowledge.
I have a front loading Bosch washing machine and I noticed the drum making a weird noise if I manually turned it. Then felt around the rubber and noticed a coin stuck between the rubber and metal drum, almost as soon as I found the obstruction it dropped underneith the drum. Should I be concerned about it? I have no idea how I'd get it out.
I have a front loading Bosch washing machine and I noticed the drum making a weird noise if I manually turned it. Then felt around the rubber and noticed a coin stuck between the rubber and metal drum, almost as soon as I found the obstruction it dropped underneith the drum. Should I be concerned about it? I have no idea how I'd get it out.
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Re: RE: Re: Whitegoods help in here....
There's 3 ways to get that coin out: Manoeuvre the machine until the coin drops into the drain pump and fish it out, hope it drops into the drain pump if it's a small coin or take it apart to get it out. You can leave it there but it has a chance of smashing the plastic drum if it catches funny. It's possible to take the hose from the outer drum to the drain pump off and move the machine so you can reach the coin. Good luck, it's a frustrating exercise, lol.DexterPunk wrote:G'day Santa, or anyone else who can offer their knowledge.
I have a front loading Bosch washing machine and I noticed the drum making a weird noise if I manually turned it. Then felt around the rubber and noticed a coin stuck between the rubber and metal drum, almost as soon as I found the obstruction it dropped underneith the drum. Should I be concerned about it? I have no idea how I'd get it out.
Sent from my Nexus 5
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Re: Whitegoods help in here....
lol thanks. I think I'll see how it goes then. It seems like it dropped far enough down that it hopefully won't cause any issues. I guess I'll keep an eye on it.
- Santaria
- Posts: 3045
- Joined: Sat Apr 09, 2005 12:55 am
- Location: Gladstone
Re: Whitegoods help in here....
Even though a coin sinks in water, the turbulence of the drum agitating the water moves the coin fairly easily. Just be aware that it can cause a pretty big hole if it doesn't end up in the drain pump.
Sent from my Nexus 5
Sent from my Nexus 5